Медіаконвертери OmniLite MCO-100-20W 13/15

Характеристики:

In conformity to IEEE 802.3 10 Base-T standard.

In conformity to IEEE 802.3u 100 Base-TX/FX standard.

Support CSMA/CD Protocol.

Built in 128Kb RAM for data buffer.

Back pressure flow control for full duplex, IEEE802.3 X and half duplex.

Automatic identification of MDI/MDI-X cross line.

Forward 1600 bytes packets for management. Can also reach 9k bytes(optional, Must inform us ahead).

Supports link fault pass through function.

Supports far end fault function.

Power from external power adapter or USB port.

Fiber connector: SC, single mode.

DIP Switch to set configurations.

Built in a watchdog timer to monitor internal switch error.

LED display for link/activity, full/half,10M/100M.

Transmission distance can reach 2km for multimode and 120KM for single mode.

Can be rack mounted in 14 slots chassis(external Power supply).

Support 4KV lighting protection(external power supply, Optional).

Индикация светодиодных ламп:

LED indicator lamp	Status	Explanation
FX Link/Act	On	Connection status display for fiber link. “ON” indicates that Fiber link is in correct connection.
FX Link/Act	Blink	Active status display of fiber link “Blink” indicates packet goes through Fx end.
TP Link/Act	On	Connection status display for electric link. “ON” indicates that electric link is in correct connection.
TP Link/Act	Blink	Active status display of electric link “Blink” indicates packet goes through Tx end.
DUP	On	Transceiver works in the full duplex mode.
DUP	Off	Transceiver works in the half duplex mode.
PWR	On	Power is on and normal.
SD	On	Fiber signal is detected.
100	On	Transfer rate of electric interface is 100Mbps.
100	Off	Rate of electric interface is 10Mbps

Характеристики передачи одноволоконного трансивера:

Single fiber	Interface	Wavelength (nm)	Transmitting optical power (dBm)	Receving sensitivity (dBm)	Transmission distance (km)	Loss allowed (dBm)
SM	SC	1310/1550	-12 ~ -3	-35	20	Standard loss:1310nm 0.4/km 1550nm 0.25/km

DIP функции (только для внешнего источника питания):

DIP1:"ON" enable LFP alarm function, "OFF" disable LFP function;

DIP2:"ON" force TX port work under 10M,"OFF" force TX port work under auto negotiation;

DIP3:"ON" force TX port work under 10M,"OFF" force TX port work under 100M;

DIP4:"ON" force TX port work under Half Duplex, "OFF" force TX port work under Full.

Виробник: OmniLite

Оптичні модулі